 Friends links |
|
| Picture |
Heading |
Updated |
 |
ANSI B16.5 Class 900 Welding Neck Flanges Raised Face Diameter 1.38-27.25in
All dimensions are in inches. These flanges will be furnished with a 1/4 raised face unless otherwise specified. Size: 1/2 (DN15) ~ 60 (DN1500) Pressure: Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 ASME B16.5 Class 900 Fla |
2018-07-16 |
 |
ANSI B16.5 Class 600 Welding Neck Flanges Outside Diameter 3.75-37in
· Bolt hole diameter 1/8 in. larger than bolt diameter. · Standard bore dimensions provided. See bore chart for other wall thicknesses · This dimension is commonly associated with true lap joints. Industry standard is to make to the slip on length through |
2018-04-25 |
 |
ANSI B16.5 Class 150 Welding Neck Pipe Flanges Length Thru Hub 1.88-6.00 in
All dimensions are in inches These flanges will be furnished with a 1/16 raised face unless otherwise specified. EO Flanges can provide ANSI B16.5 Class 150 Welding Neck Flanges, which nominal pipe size from 1/2 to 24 in, outside diameter from 3.50 to 32. |
2018-04-07 |
 |
ANSI B16.5 Class 400 Welding Neck Flanges Number of Holes 4-24 Pcs
These flanges will be furnished with a 1/4 raised face unless otherwise specified. Dimensions are in inches. Weights are in pounds. (1)- Bolt lenghts are calculated based on bolting one WN to one Blind. (2)- Bolt diameter should be 1/8 less than the bolt |
2018-04-05 |
 |
ANSI B16.5 Class 300 Welding Neck Pipe Flanges, Thickness 0.56-2.75 in
All dimensions are in inches. Flat face option available. Standard Bore will be furnished unless otherwise specified. EO Flanges can provide ANSI B16.5 Class 300 Welding Neck Flanges, which point of weld from 0.84 to 24 in, hub diameter from 1.5 to 27.63 |
2018-03-13 |
|
